PROFESSOR: So in order to use our results for the analysis
of the well-mixed room into the safety guideline,
let me just summarize the results
for the general case of transient build-up of aerosols
in the room and the associated transmission.
So here is the result that we derived
earlier, which is that the transmission
rate as a function of time is an integral over all the droplet
sizes.
And then you have here the mask filtration factor,
which depends on size P_m.
You have the breathing rate Q_b that
comes in squared because there's one person breathing out,
another person breathing in.
You got the volume of the room.
You have here the relaxation rate
for the concentration of aerosol in the room,
which here is given by four factors for ventilation,
sedimentation, filtration, and deactivation.
And then for the production of aerosols,
there's this n_q(r), which is the number of exhaled infection
quanta per volume, per air volume leaving
the breath per radius because it's still resolved
by the different droplet radii.
And this has several contributions.
It has n_d(r), which is the distribution of droplet sizes.
V_d(r) is the volume of each droplet.
Depends on the respiratory activity.
C_v is the viral load, which we are typically
assuming is near the maximum when we're concerned
about controlling spreading.
And C_i(r) is the infectivity per virion,
which we have discussed before also may have a size dependence
and is most likely higher in the aerosol droplets.
So that's the general solution.
And the safety guideline we just discussed
has in it the time average beta, so beta with the two brackets,
which is the integral in time of beta divided by the time tau.
So you break that into two parts.
So we integrate this here.
The one here is--
it gives you a steady state term,
and the interval is shown right here.
And that's basically the--
ultimately the average that remains, but initially
when the infected person first walks in the room,
there's a time to build up the concentration, which only
lowers the transmission rate.
So the average transmission rate is always
less than the steady state.
You're approaching the steady state
from below because you need the time to build up
those droplets.
And so the DELTA beta here, which is that correction,
takes the following form.
What you can do is bring the interval over time and switch
places with the integration over r
and do the time integral inside the integral.
And so that allows you to get-- instead of lambda_c here,
you get lambda_c squared, and you
get the following expression for the DELTA beta.
It may not be obvious looking at it,
but if you take a look at tau going to 0,
this expression leads to just beta bar.
So DELTA beta of 0 is beta bar, and that's
because if you take this exponential here
and you go to small times, you can linearize that and find
its lambda_c t.
So it factors-- cancels one factor
of lambda_c, one factor of tau, and you end up
with just a single lambda_c as above.
So what that means is that the average beta, which
we're plotting here, as a function of the time tau
starts out at 0.
It ramps up and then eventually approaches a steady state,
and here's the full solution.
So all the information that we've
talked about before in terms of filtration, sedimentation,
other phenomena in the well-mixed room
are all included in this framework
and can then be put into the safety guideline
to derive a general safety guideline that
has all of the physics that we want in there
and allows you to define a safe occupancy for a room.